Milk cooling tanks MP Powertank

MP Powertank
(MPP 1.500 - 14.000lt & MPPO 10.000 - 20.000lt)

01

Download brochure white pdf 32

The MP Powertank milk cooling tank series is the leading solution for milk cooling in medium and large livestock and dairy units. They are horizontal type stainless steel tanks with access manholes and automated systems for washing and disinfection after every emptying.

MP Powertank tanks are available in 18 capacities, round type from 1,500lt to 14,000lt and elliptical from 10,000 to 20,000lt. All models are constructed in such a way as to allow agitation of even small quantities of milk and exclude any possibility of ice formation.

  1. Dimensions
  2. Features
  3. Photos
  4. Video
  5. Washing Systems
1500lt - 14000lt

ΟThe round type MPP milk cooling tanks are available in 12 different models with capacities from 1,500lt to 14,000lt with one or two cooling units to meet the needs for 2-6 milkings.


TYPE W/H1 W1 H2 H3 Hm H L L1 A Legs Agitators
MPP 1500 1350 800 1590 1830 620 2290 1550 950 300 4 1
MPP 2000 1350 800 1590 1830 620 2290 2020 1010 505 4 1
MPP 2500 1350 800 1590 1780 620 2290 2350 1450 450 4 1
MPP 3000 1350 800 1590 1780 620 2290 2900 1400 750 4 1
MPP 3500 1350 800 1590 1780 620 2290 3400 975 725 6 1
MPP 4000 1680 990 1870 2055 720 2520 2370 1400 485 4 1
MPP 5000 1680 990 1870 2055 720 2520 2900 1400 750 4 1
MPP 6000 1680 990 1870 2055 720 2520 3500 1400 350 6 1
MPP 8000 1990 1090 2130 2315 720 2990 3341 1200 470 6 2
MPP 10000 1990 1090 2130 2315 720 2990 4160 1600 480 6 2
MPP 12000 2230 1450 2410 2595 720 3200 3830 1340 575 6 2
MPP 14000 2230 1450 2410 2595 720 3200 4500 1650 600 6 2

powertank 1000 14000

10000lt- 20000lt

The elliptical type MPP Oval milk cooling tanks are available in 6 different models with capacities from 10,000lt to 20,000lt and are suitable for large dairy units due to the large surface of the evaporator which allows faster cooling of large quantities of milk and while they are easily installed in places where there is a height limitation. Depending on the needs, they can be equipped with more than two cooling systems.


ΤYPE W W1 H1 H2 H3 Hm H L L1 A Legs Agitators
MPPO 10000 2300 1440 1900 2040 2290 720 2965 3600 1400 400 6 2
MPPO 12000 2300 1440 1900 2040 2290 720 2965 4430 1550 665 6 2
MPPO 14000 2300 1440 1900 2040 2290 720 2965 4980 1550 980 6 2
MPPO 16000 2300 1440 1900 2040 2290 720 2965 5790 1550 700 8 2
MPPO 18000 2300 1440 1900 2040 2290 720 2965 6425 1500 960 8 3
MPPO 20000 2300 1440 1900 2040 2290 720 2965 7200 1550 500 10 3

powertank 1000 14000

Cooling unit

These series models are available in versions of 2, 4 or 6 milkings and can be equipped with 1, 2 or 4 cooling units providing strong cooling and reliability. For models up to 5,000lt it is possible to install the cooling unit on the tank. They are available with Tecumseh, Maneurop and Copeland compressors. For their protection and better performance, the circuit is equipped with: a solenoid valve, separate pressure switches to control high and low pressure of the cooling circuit, a pressure switch to control the second fan, a filter, a receiver bottle for the freon, a safety valve on the receiver, an expansion valve of appropriate power, separate thermomagnetic switches installed on the power circuit for each compressor and a voltage controller.

Insulation

All models are made entirely of stainless steel AISI 304 and are optimally insulated with polyurethane foam ensuring that a few minutes operation of the cooling unit is sufficient to preserve the pre-cooled milk.

Stainless steel external pressure equalizer

The stainless steel filter of the tanks prevents air entrapment inside the tank during its filling and facilitates drainage. Depending on the size of the tank, there can be up to three filters that can be easily removed.

Measuring dipstick

All MP Powertank models are equipped with a stainless steel measuring dipstick and a conversion table in liters for easy calculation of the quantity of milk.

Agitation motor

The MP Powertank milk cooling tanks are equipped with powerful motors made by the French company Sirem, set to 21-25 rpm and placed on an elevated base to ensure easy cleaning. Tanks from 8,000 to 20,000 lt have two or three motors for better agitation of the quantity of milk.

Manhole

The stainless steel manhole of the tanks provides superior sealing without the use of a flange. It is of a Φ400mm diameter for models up to 3,000lt and Φ500mm for models up to 4,000lt. It is fully rotatable and its smart design allows it to be held in the open position.

Ladder

All models over 1,500lt have a stainless steel ladder with anti-slip steps for the inspection of the milk content through the manhole at the top of the tank.

Milk inlet

The MP Powertank cooling tanks have 1 or 2 milk inlets of Φ76mm diameter. They are sealed with a stainless steel cap for the protection of the content of the tank.

Milk outlet

For models up to 6,000lt, a stainless steel butterfly valve, DN50 or SMS51 type, is used for milk outlet. For larger models, valve DN80 or SMS76 type is used. In all cases, adaptation to specific needs is possible.

Temperature sensor

The position of the temperature sensor has been carefully selected so that it is easily replaced in case of failure.

Stainless steel adjustable legs

The MP Powertank tanks have 4 to 12 support legs, depending on the model, all height adjustable, for proper alignment even on uneven floors.

Self-cleaning valve (optional)

A self-cleaning valve can optionally be installed to assist the use of the tanks' washing system.

Electronic measuring system (optional)

A high-precision electronic measuring system with the use of a sensor- float can be installed for a reliable control of the quantity of milk inside the tank. The panel of the system has a large easy-to-read 5-digit display indicating the quantity of milk in kilograms or liters.

View the embedded image gallery online at:
https://www.milkplan.com/site/index.php/en/products/cooling-storage/mp-powertank#sigProGalleria9eca5170b7

Two systems are provided for the control of the cooling and washing functions of the MP Powertank tanks:


  MPP Standard washing system   MPP Control washing system